Emerson Micro Motion 1000 Series Configuration And Use Manual page 23

Using the Transmitter Display
To change from decimal to exponential notation (see Figure 2-3):
1. until the rightmost digit is flashing.
Select
2. to
Scroll
3. To enter the exponent:
a.
Select
b.
Scroll
between 0 and 3 (for the first position in the exponent), or values between 0 and 9 (for the
second position in the exponent).
c.
Select
Notes: When switching between decimal and exponential notation, any unsaved edits are lost. The
system reverts to the previously saved value.
While in exponential notation, the positions of the decimal point and exponent are fixed.
Figure 2-3 Numeric values in exponential notation
Sign
To change from exponential to decimal notation:
1. until the
Select
2. to
Scroll
3. . The display changes to remove the exponent.
Select
To exit the menu:
• If the value has been changed,
is displayed.
-
Select
-
Scroll
• If the value has not been changed,
is displayed.
Configuration and Use Manual
, then . The display changes to provide two spaces for entering the exponent.
E Select
until the desired digit is flashing.
to the desired value. You can enter a minus sign (first position only), values
.
SX.XXXEYY
Digits
Enter a four-digit
number; three digits
must fall to the right
of the decimal point.
is flashing.
E
.
d
Select
to apply the change and exit.
to exit without applying the change.
Select
Digit (0–9)
Sign or Digit (0–3)
E
Exponent
indicator
and simultaneously until the confirmation screen
Scroll
and simultaneously until the previous screen
Scroll
13