Universal Mount For Rosemount Wireless Wt210 Corrosion Transmitters - Emerson Rosemount Wireless WT210 Quick Start Manual

October 2023
1 Universal Mount for Rosemount Wireless
WT210 Corrosion Transmitters
Universal Mount for Rosemount Wireless WT210 Corrosion
Transmitters is a device that mounts one sensor on pipe diameters of
NPS 4 to NPS 20 (DN 100 to DN 500). Universal Mount for Rosemount
Wireless WT210 Corrosion Transmitters are designed to optimize
the ultrasonic performance of the sensors that are attached with
it. The key to achieving high performance is to deliver constant
coupling pressure for the ultrasonic sensors and the pipe. The strap
and spring assembly of these mounts are engineered to deliver
consistent performance at a wide range of temperatures.
NOTICE
This guide provides basic guidelines for the installation of the
Universal Mount for Rosemount Wireless WT210 Corrosion
Transmitters. It does not provide instructions for installing
Rosemount Wireless WT210 Corrosion Transmitters, for the
installation of Rosemount Wireless WT210 Corrosion Transmitters
please refer to Rosemount WT210 Wireless Corrosion Transmitter
Quick Start
Emerson.com\Rosemount.
WARNING
Rosemount Wireless Permasense WT210 Wireless corrosion
transmitters should only be mounted on approved mounting
solutions by persons who are trained in the safe and correct
installation procedures.
WARNING
Physical access
Unauthorized personnel may potentially cause significant damage to
and/or misconfiguration of end users' equipment. This could be
intentional or unintentional and needs to be protected against.
Physical security is an important part of any security program and
fundamental in protecting your system. Restrict physical access by
unauthorized personnel to protect end users' assets. This is true for
all systems used within the facility.
Quick Start Guide
Guide. This guide is also available electronically on
Quick Start Guide
3