Emerson Micro Motion 1000 Series Configuration And Use Manual page 105

Pressure Compensation, Temperature Compensation, and Polling
Figure 9-6 Configuring polling with the Communicator
Polling for pressure
On-Line Menu >
5 Detailed Setup
1 Charize Sensor
Specify Poll Control 1
Enter Ext Dev Tag 1
Specify Polled Var 1
Send
Home
Done
Configuration and Use Manual
Polling for temperature
On-Line Menu >
5 Detailed Setup
1 Charize Sensor
9 Ext temp
Set Static temperature
to 32 °F (0 °C)
8 Polling setup
(1)
Specify Poll Control 2
Enter Ext Dev Tag 2
Specify Polled Var 2
Send
Home
Done
Send
(1) Choose Primary if the external
device will probably be accessed by
another device acting as a secondary
master (e.g., a Communicator).
Choose Secondary if the external
device will probably be accessed by
(2)
another device acting as a primary
master.
(2) If you are configuring both Polled
Variable 1 and Polled Variable 2, use
the same Poll Control setting for
both. If you do not, Poll as Primary
will be used for both devices.
95