Remote Monitor Panel (Optional); Figure 11−1. Remote Monitor Panel - Eaton Powerware 9315 Installation And Operation Manual

11.4

Remote Monitor Panel (Optional)

As an option, you can install Remote Monitor Panels (RMPs) to monitor the
operation of the Parallel Capacity/Redundant system from virtually any location
within your facility, up to 500 feet from the SBM. Each RMP contains backlit status
indicators and a local horn. You can flush-mount or surface-mount an RMP on a
desktop, wall, or wherever you have a serial interface line. A maximum of two
monitoring accessories (RMPs, Relay Interface Modules (RIMs), or Supervisory
Contact Modules (SCMs)) can be installed. See Table 11−1 for the number of
accessories permitted. Figure 11−1 shows an RMP .
Remote Monitor Panel
2
1
1
11−2
Figure 11−1. Remote Monitor Panel
Table 11−1. Optional Monitoring Accessories
Number and Type of Accessories Permitted
Relay Interface Module Supervisory Contact Module
2
1
1
EATON Powerware 9315 Parallel Capacity/Redundant System
164201150
2
1
1
Rev. E www.powerware.com