Installing A Supervisory Contact Module; Installation Procedures; Figure 6−1. Supervisory Contact Module - Eaton Powerware 9315 Installation And Operation Manual

Installing a Supervisory
Contact Module
6.1

Installation Procedures

The optional Supervisory Contact Module (SCM) as shown in Figure 6−1 provides
contacts for monitoring Parallel Capacity/Redundant system status. A maximum of
two monitoring accessories (RMPs, RIMs, or SCMs) can be installed. Refer to
Chapter 4, Table 4−1 for the number of accessories permitted. See Drawing
164201150−19 in Appendix A for enclosure dimensions, side views, and knockout
patterns.
TB2
NOTE: Before installing an SCM, be sure you have prepared the SBM according to
the instructions in Chapter 2.
EATON Powerware 9315 Parallel Capacity/Redundant System
164201150 Rev. E www.powerware.com
Figure 6−1. Supervisory Contact Module
6
SURFACE MOUNT
(FOR HANGING)
WIRES MUST
BE TWISTED
6−1