Figure 9−9. Mimic Screen - Eaton Powerware 9315 Installation And Operation Manual

Select Mimic from the Graphics menu to display a real-time graphical representation
of the flow of current through the UPS.
Figure 9−9 shows the Mimic screen.
NOTE: Number of UPMs showing on MIMIC screen is dependent on number of units installed at site.
UPS System Normal
ALARM: NONE
NOTICE: NONE
INPUT
BYPASS
MBP
INPUT
Meters Events
The Mimic screen shows the internal components of the UPS cabinet. The flow of
current through the components is highlighted. NOTE: The number of UPMs displayed
on the Mimic screen is dependent on the actual number of units installed at location.
Also all alarms are shown for information purposes only. Only actual alarms would be
shown in the installed instance.
EATON Powerware 9315 Parallel Capacity/Redundant System
164201150 Rev. E www.powerware.com
Uninterruptible Power System
STATIC SWITCH
FBP
CBP
MBP
Graphics
Statistics
Figure 9−9. Mimic Screen
CBS
MIS
CAPACITY
Setup
15 JUL 1998 09:25:42
Battery Minutes 48.5
KWA KV Amps/Phase
500 420 222
LOAD 0 0 0
9−11