Options And Accessories; Remote Monitor Panel; Relay Interface Module; Modem - Eaton Powerware 9315 Installation And Operation Manual

8.3

Options and Accessories

Contact your sales representative for information about any of these available
options:
8.3.1

Remote Monitor Panel

An optional Remote Monitor Panel (RMP) contains backlit status indicators and
a local horn, allowing you to monitor the operational status and alarm condition of
the SSBM from virtually any location within your facility. You can install multiple
RMPs at remote locations to increase your monitoring capabilities. This option is
described further in Chapter 11, Using Features and Options."
8.3.2

Relay Interface Module

An optional Relay Interface Module (RIM) uses relay contact closures to indicate
the operating status and alarm condition of the SSBM. The module uses a serial
interface line and may support up to eight critical loads. This option is described
further in Chapter 11, Using Features and Options."
8.3.3

Modem

An optional modem is available for use with the Remote Notification feature
described in Chapter 14, Remote Notification". Refer to the manual supplied
with the modem for modem operating instructions.
EATON Powerware 9315 Parallel Capacity/Redundant System
164201150 Rev. E www.powerware.com
8−3