Program Unit Name; Change Password - Eaton Powerware 9315 Installation And Operation Manual

13.6.5

Program Unit Name

If Program Unit Name is selected from the main menu, the following is displayed:
Program Unit Name
Unit Name:
Enter New Name or <CR> No Change:
NOTE: Unit Name is 45 characters maximum
The current unit name is displayed. This name will be displayed on the second line
of the display and in the headers of prints from Terminal mode. If a change is
desired, the new unit name should be entered at the prompt. The unit name is 45
characters maximum and includes spaces and any punctuation. If the user wants
to center the text portion of the name, the appropriate number of leading spaces
should be included when entered.
13.6.6

Change Password

If Change Password is selected from the main menu, the following menu is
displayed:
Change Password
Enter New Password:
Verify New Password:
NOTE: Password must be six characters in length.
<CR> to return with no change.
The password will be changed if the user enters and verifies the password.
The entry must be six characters.
EATON Powerware 9315 Parallel Capacity/Redundant System
164201150 Rev. E www.powerware.com
13−13