Advanced Phone Connectivity; Things You Should Know About Your Uconnect Phone - Jeep Compass Operating Information Manual

To un-mute the Uconnect Phone:
• Push the Voice Command
• Following the beep, say "Mute off."

Advanced Phone Connectivity

Transfer Call To And From Mobile Phone
The Uconnect Phone allows ongoing calls to be
transferred from your mobile phone to the
Uconnect Phone without terminating the call. To
transfer an ongoing call from your Uconnect
Phone paired mobile phone to the Uconnect
Phone or vice versa, push the Voice Command
button and say "Transfer Call."
Connect Or Disconnect Link Between The
Uconnect Phone And Mobile Phone
Your mobile phone can be paired with many
different electronic devices, but can only be
actively "connected" with one electronic device
at a time.
If you would like to connect or disconnect the
Bluetooth connection between a Uconnect
Phone paired mobile phone and the Uconnect
Phone, follow the instructions described in your
mobile phone user manual.
List Paired Mobile Phone Names
• Push the Phone
button to begin.
• After the "Ready" prompt and the following
beep, say "Setup Phone Pairing."
• When prompted, say "List Phones."
• The Uconnect Phone will play the phone
names of all paired mobile phones in order
button.
from the highest to the lowest priority. To
"Select" or "Delete" a paired phone being
announced, push the Voice Command
button and say "Select" or "Delete." Also,
see the next two sections for an alternate way
to "Select" or "Delete" a paired phone.
Select Another Mobile Phone
This feature allows you to select and start using
another phone paired with the Uconnect Phone.
• Push the Phone
• After the "Ready" prompt and the following
beep, say "Setup Select Phone" and follow
the prompts.
• You can also push the Voice Command
button at any time while the list is being
played, and then choose the phone that you
wish to select.
• The selected phone will be used for the next
phone call. If the selected phone is not avail-
able, the Uconnect Phone will return to using
the highest priority phone present in or near
(approximately within 30 ft (9 m) the vehicle.
Delete Uconnect Phone Paired Mobile
Phones
• Push the Phone
• After the "Ready" prompt and the following
beep, say "Setup Phone Pairing."
• At the next prompt, say "Delete" and follow
• You can also push the Voice Command
Things You Should Know About
Your Uconnect Phone
Uconnect Phone Tutorial
To hear a brief tutorial of the system features,
button to begin. push the Phone
Tutorial."
Voice Training
For users experiencing difficulty with the system
recognizing their voice commands or numbers,
the Uconnect Phone Voice Training feature may
be used. To enter this training mode, follow one
of the two following procedures:
• From outside the Uconnect Phone mode
• Push the Voice Command
You can either push the Uconnect Phone button
to restore the factory setting or repeat the words
button to begin.
and phrases when prompted by the Uconnect
Phone. For best results, the Voice Training
session should be completed when the vehicle
the prompts.
button at any time while the list is being
played, and then choose the phone you wish
to delete.
button and say "Uconnect
(e.g., from radio mode), push and hold the
Voice Command button for five seconds
until the session begins, or,
button and say
the "Voice Training," "System Training," or
"Start Voice Training" command.
223