Control Buttons; Step Button; Reset Button; Trip Odometer (Odo) - Jeep Compass Operating Information Manual

Control Buttons

Mini-Trip Control Buttons

STEP Button

Push the STEP button located on the steering
wheel to scroll through sub menus (i.e., Tem-
perature, Trip Functions: Odometer, Trip A,
Trip B).
68

RESET Button

To reset the display shown, turn the ignition to
the ON position, then push and hold the RESET
button located on the steering wheel.
The following displays can be reset or changed:
• Trip A
• Trip B

Trip Odometer (ODO)

This display shows the distance traveled since
the last reset. Push and release the STEP
button on the instrument cluster to switch from
odometer, to Trip A or Trip B.
Trip A
Shows the total distance traveled for Trip A since
the last reset.
Trip B
Shows the total distance traveled for Trip B
since the last reset.
WARNING/INDICATOR LIGHTS
AND MESSAGES
The warning/indicator light switches on in the
instrument panel together with a dedicated mes-
sage and/or acoustic signal when applicable.
These indications are indicative and precaution-
ary and as such must not be considered as
exhaustive and/or alternative to the information
contained in the Owner Manual, which you are
advised to read carefully in all cases. Always
refer to the information in this chapter in the
event of a failure indication.
All active telltales will display first, if applicable.
The system check menu may appear different
based upon equipment options and current ve-
hicle status. Some telltales are optional and may
not appear.
The following warning lamps and indicators will
alert you to a vehicle condition that may become
serious. Some lamps will illuminate when you
start your vehicle to make sure they work. If any
lamps remain on after starting your vehicle, refer
to the respective system warning lamp for fur-
ther information.