Help Command; Cancel Command; Pair (Link) Uconnect Phone To A Mobile Phone; Dial By Saying A Number - Jeep Compass Operating Information Manual

Voice Command Tree
Refer to "Voice Tree" in this section.

Help Command

If you need assistance at any prompt, or if you
want to know your options at any prompt, say
"Help" following the beep. The Uconnect Phone
will play all the options at any prompt if you ask
for help.
To activate the Uconnect Phone from idle, sim-
ply push the Phone button and follow the
audible prompts for directions. All Uconnect
Phone sessions begin with a push of the Phone
button on the faceplate.

Cancel Command

At any prompt, after the beep, you can say
"Cancel" and you will be returned to the main
menu. However, in a few instances the system
will take you back to the previous menu.
Pair (Link) Uconnect Phone To A
Mobile Phone
To begin using your Uconnect Phone, you must
pair your compatible Bluetooth enabled mobile
phone.
To complete the pairing process, you will need
to reference your mobile phone Owner's
Manual. The Uconnect website may also pro-
vide detailed instructions for pairing.
The following are general phone to Uconnect
Phone pairing instructions:
• Push the Phone
button to begin.
• After the "Ready" prompt and the following
beep, say "Setup Phone Pairing."
• When prompted, after the beep, say "Pair a
Phone" and follow the audible prompts.
• You will be asked to say a four-digit Personal
Identification Number (PIN), which you will
later need to enter into your mobile phone.
You can enter any four-digit PIN. You will not
need to remember this PIN after the initial
pairing process.
• For identification purposes, you will be
prompted to give the Uconnect Phone a
name for your mobile phone. Each mobile
phone that is paired should be given a unique
phone name.
• You will then be asked to give your mobile
phone a priority level between one and
seven, with one being the highest priority. You
can pair up to seven mobile phones to your
Uconnect Phone. However, at any given time,
only one mobile phone can be in use, con-
nected to your Uconnect System. The priority
allows the Uconnect Phone to know which
mobile phone to use if multiple mobile phones
are in the vehicle at the same time. For
example, if priority three and priority five
phones are present in the vehicle, the
Uconnect Phone will use the priority three
mobile phone when you make a call. You can
select to use a lower priority mobile phone at
any time (refer to "Advanced Phone Connec-
tivity" in this section).

Dial By Saying A Number

• Push the Phone
button to begin.
• After the "Ready" prompt and the following
beep, say "Dial."
• The system will prompt you to say the num-
ber you want to call.
• For example, you can say "151-1234-5555."
• The Uconnect Phone will confirm the phone
number and then dial. The number will ap-
pear in the display of certain radios.

Call By Saying A Name

• Push the Phone
button to begin.
• After the "Ready" prompt and the following
beep, say "Call."
• The system will prompt you to say the name
of the person you want to call.
• After the "Ready" prompt and the following
beep, say the name of the person you want to
call. For example, you can say "John Doe,"
where John Doe is a previously stored name
entry in the Uconnect phonebook or down-
loaded phonebook. To learn how to store a
name in the phonebook, refer to "Add Names
To Your Uconnect Phonebook," in this
section.
217