Jeep Compass Operating Information Manual page 179

Rear Tow Eye Installation
The rear tow eye receptacle is located behind a
door, located on the left rear bumper fascia.
To install the tow eye, open the door using the
vehicle key or a small screwdriver, and thread
the tow eye into the receptacle.
Insert the flat end of the jack handle through the
eye and tighten, refer to "Jacking and Tire
Changing" in this chapter for information. The
tow hook must be fully seated to the attaching
bracket through the left rear bumper fascia as
shown. If the tow hook is not fully seated to the
attaching bracket, the vehicle should not be
towed.
Rear Tow Eye Installed
176
ENHANCED ACCIDENT
RESPONSE SYSTEM (EARS)
This vehicle is equipped with an Enhanced
Accident Response System.
Please refer to "Occupant Restraint Systems" in
"Safety" for further information on the Enhanced
Accident Response System (EARS) function.
EVENT DATA RECORDER
(EDR)
This vehicle is equipped with an Event Data
Recorder (EDR). The main purpose of an EDR
is to record data that will assist in understanding
how a vehicle's systems performed under cer-
tain crash or near crash-like situations, such as
an air bag deployment or hitting a road obstacle.
Please refer to "Occupant Restraint Systems" in
"Safety" for further information on the Event
Data Recorder (EDR).