Blue Telltale Lights; White Telltale Lights - Jeep Compass Operating Information Manual

Blue Telltale Lights

High Beam Indicator Light
Blue Telltale Light
High Beam Indicator Light
This indicator shows that the high beam headlights are on. Push the multifunction control lever away from you to switch the
headlights to high beam. Pull the lever toward you to switch the headlights back to low beam. Pull the lever toward you for
a temporary high beam on, "flash to pass" scenario.

White Telltale Lights

Cruise Control On Indicator Light
White Telltale Light
Cruise Control On Indicator Light
This indicator shows when the Speed Control System is turned on.
Hill Descent Control (HDC) Indicator Light — If Equipped
White Telltale Light
Hill Descent Control (HDC) Indicator Light
This indicator shows when the Hill Descent Control (HDC) feature is turned on. The lamp will be on solid when HDC is
armed. HDC can only be armed when the transfer case is in the "4WD LOW" position and the vehicle speed is less then
30 mph (48 km/h). If these conditions are not met while attempting to use the HDC feature, the HDC indicator light will flash
on/off.
What It Means
What It Means
What It Means
79