Commands - Jeep Compass Operating Information Manual

NOTE:
If you do not say a command within a few
seconds, the system will present you with a
list of options.
If you would like to interrupt the system while it
lists options, push the Voice Command
ton, listen for the beep, and say your command.
Pushing the Voice Command
the system is speaking is known as "barging in."
The system will be interrupted, and after the
beep, you can add or change commands. This
will become helpful once you start to learn the
options.
NOTE:
At any time, you can say the words "Cancel,"
"Help" or "Main Menu."
These commands are universal and can be
used from any menu. All other commands can
be used depending upon the active application.
When using this system, you should speak
clearly and at a normal speaking volume.
The system will best recognize your speech if
the windows are closed, and the heater/air
conditioning blower is set to low.
At any point, if the system does not recognize
one of your commands, you will be prompted to
repeat it.
To hear the first available Menu, push the Voice
Command button and say "Help" or "Main
Menu."

Commands

The Voice Command system understands two
types of commands, Universal commands and
Local commands. Universal commands are
available at all times. Local commands are
available if the supported radio mode is active.
but-
Changing The Volume
1. Start a dialogue by pushing the Voice Com-
button while
mand button.
2. Say a command (e.g., "Help").
3. Use the ON/OFF VOLUME rotary knob to
adjust the volume to a comfortable level
while the Voice Command system is speak-
ing. Please note the volume setting for Voice
Command is different than the audio system.
Main Menu
Start a dialogue by pushing the Voice Command
button. You may say "Main Menu" to switch
to the main menu.
In this mode, you can say the following com-
mands:
• "Radio AM" (to switch to the radio AM mode)
• "Radio FM" (to switch to radio FM mode)
• "Sat" (to switch to Satellite radio mode)
• "Disc" (to switch to the disc mode)
• "USB" (to switch to USB mode)
• "Bluetooth Streaming" (to switch to Bluetooth
Streaming mode)
• "Memo" (to switch to the memo recorder)
• "System Setup" (to switch to system setup)
Radio AM
To switch to the AM band, say "AM" or "Radio
AM." In this mode, you may say the following
commands:
• "Frequency #" (to change the frequency)
• "Next Station" (to select the next station)
• "Previous Station" (to select the previous
station)
• "Radio Menu" (to switch to the radio menu)
• "Main Menu" (to switch to the main menu)
Radio FM
To switch to the FM band, say "FM" or "Radio
FM." In this mode, you may say the following
commands:
• "Frequency #" (to change the frequency)
• "Next Station" (to select the next station)
• "Previous Station" (to select the previous
station)
• "Menu Radio" (to switch to the radio menu)
• "Main Menu" (to switch to the main menu)
Disc Mode
To switch to the disc mode, say "Disc." In this
mode, you may say the following commands:
• "Track" (#) (to change the track)
• "Next Track" (to play the next track)
229