Jeep Compass Operating Information Manual page 224

• After the "Ready" prompt and the following
beep, say the name of the language you wish
to switch to English, Espanol, or Francais.
• Continue to follow the system prompts to
complete the language selection.
After selecting one of the languages, all prompts
and voice commands will be in that language.
NOTE:
After every Uconnect Phone language
change operation, only the
specific 32-name phonebook is usable. The
paired phone name is not language-specific
and usable across all languages.
Emergency Assistance
If you are in an emergency and the mobile
phone is reachable:
• Pick up the phone and manually dial the
emergency number for your area.
If the phone is not reachable and the Uconnect
Phone is operational, you may reach the emer-
gency number as follows:
• Push the Phone
button to begin.
• After the "Ready" prompt and the following
beep, say "Emergency" and the Uconnect
Phone will instruct the paired mobile phone to
call the emergency number.
NOTE:
• The default number is 112. The number
dialed may not be applicable with the
available mobile service and area.
• If supported, this number may be pro-
grammable on some systems. To do this,
push the Phone
"Setup," followed by "Emergency."
• The Uconnect Phone does slightly lower
your chances of successfully making a
language-
phone call as to that for the mobile phone
directly.
WARNING!
To use your Uconnect Phone System in an
emergency, your mobile phone must be:
• Turned on.
• Paired to the Uconnect System.
• Have network coverage.
Breakdown Service — If Equipped
If you need Breakdown service:
1. Push the Phone
2. After the "Ready" prompt and the following
beep, say "Breakdown service."
NOTE:
The Breakdown service number has to be
setup before using. To setup, push the
Phone
down Service" and follow prompts.
Paging
button and say To learn how to page, refer to "Working With
Automated Systems." Paging works properly
except for pagers of certain companies, which
time out a little too soon to work properly with
the Uconnect Phone.
Voice Mail Calling
To learn how to access your voice mail, refer to
"Working With Automated Systems."
Working With Automated Systems
This method is used in instances where one
generally has to press numbers on the mobile
phone keypad while navigating through an au-
tomated telephone system.
You can use your Uconnect Phone to access a
voice mail system or an automated service,
such as a paging service or automated cus-
tomer service line. Some services require imme-
button to begin.
diate response selection. In some instances,
that may be too quick for use of the Uconnect
Phone.
button and say "Setup, Break-
221