Advanced Phone Connectivity - Jeep Cherokee 2009 Operating Information Manual

Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular
phone keypad and still use the UConnect system
(while dialing via the cell phone keypad, the user
must exercise caution and take precautionary
safety measures). By dialing a number with your
paired Bluetooth cellular phone, the audio will be
played through your vehicle's audio system. The
UConnect system will work the same as if you
dial the number using voice recognition.
NOTE:
Certain brands of mobile phones do not send
the dial ring to the UConnect system to play it
on the vehicle audio system, so you will not
hear it. Under this situation, after successfully
dialing a number the user may feel that the call
did not go through even though the call is in
progress. Once your call is answered, you will
hear the audio.
Mute/Un-Mute (Mute Off)
When you mute the UConnect system, you will
still be able to hear the conversation coming from
the other party, but the other party will not be able
to hear you. In order to mute the UConnect
system:
• Press the "Voice Recognition" button.
• Following the beep, say Mute.
In order to un-mute the UConnect system:
• Press the "Voice Recognition" button.
• Following the beep, say Mute off.

Advanced Phone Connectivity

Transfer Call to and from Cellular Phone
The UConnect system allows ongoing calls to be
transferred from your cellular phone to the
UConnect system without terminating the call. To
transfer an ongoing call from your UConnect
paired cellular phone to the UConnect system or
vice versa, press the "Voice Recognition" button
and say Transfer Call.
Connect or Disconnect Link Between the
UConnect System and Cellular Phone
Your cellular phone can be paired with many
different electronic devices, but can only be ac-
tively connected with one electronic device at a
time.
If you would like to connect or disconnect the
Bluetooth connection between a UConnect
paired cellular phone and the UConnect system,
follow the instructions described in your cellular
phone User's Manual.
List Paired Cellular Phone Names
• Press the "Phone" button to begin.
• After the "Ready" prompt and the following
beep, say "Setup Phone Pairing."
• When prompted, say List Phones.
• The UConnect system will play the phone
names of all paired cellular phones in order
from the highest to the lowest priority. To "se-
lect" or "delete" a paired phone being an-
nounced, press the "Voice Recognition" button
and say "Select" or "Delete." Also, see the next
two sections for an alternate way to "select" or
"delete" a paired phone.
Select Another Cellular Phone
This feature allows you to select and start using
another phone paired with the UConnect system.
• Press the "Phone" button to begin.
• After the Ready prompt and the following
beep, say Setup Select Phone and follow the
prompts.
• You can also press the "Voice Recognition"
button at any time while the list is being played,
and then choose the phone that you wish to
select.
• The selected phone will be used for the next
phone call. If the selected phone is not avail-
able, the UConnect system will return to using
the highest priority phone present in or near
(approximately within 30 ft [9 m]) the vehicle.
57