Dialling; Programming One-Touch Dialling Keys - Olivetti OFX 3200 Instruction Manual

5. Press START again to accept the value indicated for the parameter displayed, or display an
alternative by pressing
The display shows the next parameter.
SET-UP PARAMETERS
RESOLUTION AFTER TX/COPY
6. Repeat the procedure from step 3 if you want to set the next parameter or press STOP to exit
from the menu.

DIALLING

PROGRAMMING ONE-TOUCH DIALLING KEYS

There are 30 one-touch dialling keys (01 - 30), situated on the right-hand section of the console.
On each key, you can program:
- Facsimile number
- Telephone number
- Subscriber's name
- Transmission speed (14400, 9600 or 4800 bps; the latter is useful on lines with a lot of
interference). The transmission speed set here takes priority over the speed set in the
operating configuration.
- Elimination of echo during international and intercontinental calls.
- Closed network. This parameter enables you to set up a limited-access communication
network. Communication is restricted by checking the last 4 or 6 digits in a receiver's or
sender's facsimile number. This parameter can only be activated if it is enabled in the
operating configuration
I
To enter data, see the Operation Summary, page 54.
1. Press DIAL DIR.
TELEPHONE DIRECTORY
ONE-TOUCH DIALLING
58
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
or and press START.
&
Getting the Best from Your Facsimile Machine, page 32 .