Table of Contents
Advertisement
•
HALF TONES, if the document contains shaded areas. An "arrow" in line with the
symbol and an "arrow" in line with the
on the bottom line of the display.
S
ENDING A DOCUMENT
1.
Insert the document in the automatic document feeder (ADF). The default contrast
value is displayed on the bottom line.
The initial resolution value is:
If you want, change the contrast and resolution values as described previously.
2.
To dial the number of the correspondent to whom you wish to send the document,
press the
3.
To start sending the document, press the
If the document is sent correctly, once this operation has been completed, the display
will show the message
Note:
To delete an incorrect digit, move the cursor, using the
right of the incorrect digit and press the
the whole number, hold down the
Note:
If you want, you can dial the correspondent's number from the phone book,
see "Programming the phone book" and "Sending a document using
the quickest method".
Note:
If you want to abort the transmission in progress, press the
fax machine unloads the document from the ADF and returns to its initial
stand-by mode.
If the document to be removed consists of more than one sheet, before
pressing
H
EARING THE DIALLING TONE WHEN SENDING A DOCUMENT
1.
Insert the document in the automatic document feeder (ADF). The display shows on
the top line
. The initial resolution value is
NORMAL
If you want, change the contrast and resolution values as described previously.
2.
To hear the dialling tones, press the
length of the transmission in minutes and seconds in the top right-hand corner.
3.
To dial the number of the correspondent to whom you wish to send the document,
press the
4.
As soon as you hear the tone of your correspondent's fax machine, press the
Transmission is started. If the document is sent correctly, once this operation has been
completed, the display will show the message
4-4
FAX TRANSMISSION AND RECEPTION OPERATIONS
-
keys.
tx completed
to unload the first, remove all the others by hand.
and on the bottom line the default contrast value
DOCUMENT READY
-
keys.
symbol printed on the console appear
(standard).
key.
for a moment.
key for a few seconds.
(standard).
key. The display shows
tx completed
keys, to the
key; if you want to delete
ON LINE
and the
for a moment.
key. The
key.
Advertisement
Table of Contents
