Programming One-Touch Dialling Keys - Olivetti OFX 2100 Instruction Manual

PROGRAMMING ONE-TOUCH DIALLING KEYS

The facsimile machine offers several methods of dialling prerecorded facsimile and telephone numbers.
The easiest and fastest method of dialling a number is by pressing one key. There are 16 of these one-touch
÷
dialling keys (0
- Facsimile number
- Telephone number
- Name of correspondent
- Transmission speed (normal speed 9600 bps - half-speed 4800 bps, useful on a disturbed line).
- Closed network. This parameter enables you to create a communication network with limited access.
Access is limited by checking the last 4 or 6 digits in the receiver's or sender's facsimile number. This
parameter can only be set here if it has been enabled in the operating configuration.
This section explains how to program one-touch dialling keys. How to use these keys to dial a number is
explained in the "TRANSMISSION" chapter.
o
The facsimile is on. There is no document in the ADF.
1. Press FUNCTION followed by 4.
2. Press START to access the menu.
3. Press START to enable one-touch dialling.
Using the ∨ ∨ οr ∧ ∧ key, select the one-touch dialling
4
key that you want to program, e.g. 6.
cap05.p65
9, *, # and A ÷ D). Each key may be programmed with the following data:
19
PROGRAMMING
F U N C T I O N
4 : P H O N E B O O K
P H O N E B O O K
1 - T O U C H D I A L I N G
1 - T O U C H D I A L I N G
1 :
1 - T O U C H D I A L I N G
6 :
13/04/00, 22.17
+
19