Preparing The Machine For Use; Adjusting The Paper Cassette - Olivetti OFX 3200 Instruction Manual

Lift open the document support and the document tray as shown in the figure below and connect
the power cable.

ADJUSTING THE PAPER CASSETTE

1. Remove the front cover of the
paper cassette by releasing and
lifting it upwards.
IMPORTANT: The size set on the paper cassette must correspond to the one selected by means
of the configuration parameter "PRINT FORMAT"
Facsimile Machine , page 32 .

PREPARING THE MACHINE FOR USE

2. Holding it at the bottom, move
the internal side part shown in
the figure above. Move from
left to right, to switch from A4 to
Letter and Legal. From right to
left to switch from Letter and
Legal to A4.
3. Close the cover by pushing
down on both sides until it clicks
into position.
&
Getting the Best From Your
7