Panasonic MEWNET-F Technical Manual page 74

Settings of CPU
By setting the system registers of the CPU, you can change the remote I/O operation mode.Set
according to the operation mode.
The system registers related to the MEWNET-F are as follows.
No. 27 CPU operation status when a communication error occurs.
No. 28 I/O error in the remote I/O slave station
No. 35 Confirmation of the connection of a slave station
No. 36 Selection of remote I/O update method
To set the system registers, use teh FP Programmer or a tool software.For the details, refer to the
operation manuals for each programming tools.
Reference:
For information on the registers numbers 27 and 28, <7.2 Remote I/O Control When an Error Occurs>
For information on the registers number 35, <Chapter 6 Remote I/O Map> and <7.3 Slave Station
Connection Confirmation Mode>
For information on the registers number 36, <7.3 Remote I/O update Timing Method>
Key Point:
A system register setting will be backed up once it has been registered.
5-12