Preparation Of Mewnet-F Components; Master Station (Master Unit) - Panasonic MEWNET-F Technical Manual

4.1 Preparation of MEWNET-F Components

Prepare each stations that configures the remote I/O system [MEWNET-F].The system configuration and
the condition and method of installation is described.

4.1.1 Master Station (Master Unit)

A master station can be configured with a "remote I/O master unit" installed on the FP2/FP2SH or
FP3/FP10SH system.Up to 4 units can be installed to one CPU unit.
Installation condition
A master unit can be installed in any I/O slot on a mater backplane or expansion backplane.
Up to 4 units can be installed.
The conditions of system configuration (such as number of expansion, restrictions on power supply and
total length) are the same as the normal case.
4-2