Table of Contents
Advertisement
(3)Mode selector switches....
(4)RS485 interface ......
(5)Mounting screw ..........
Connector
Sets the terminal station and the output mode a communication
error occurs.
SW
Setting
1､2
Terminal station setting
Output condition during
3
a communication error
* The settings of SW1 and SW2 should be the same.
* The swithces are all set to the OFF position at the factory.SW4 is not
used.
* The settings will be accepted when the power turns on.
For connecting the communication cables.
Connects the slave unit to a CPU slot on the backplane.
OFF
Not terminal
Terminal station
station
Maintains its output
Output off
condition
ON
2-11
Advertisement
Table of Contents
Troubleshooting
