Remote I/O And Expansion I/O - Panasonic MEWNET-F Technical Manual

11.2.2 Remote I/O and Expansion I/O

The I/O link unit enables the I/O link between FP1 and FP2/FP2SH/FP3/FP10SH connected with a 2-
conductor cable via the remote I/O system.
1. On FP2/FP2SH/FP3/FP10SH, the I/O link unit is treated as one slave station, and the I/O is controlled
as the remote I/O.The I/O that has been allocated in the remote I/O map is used.32-point input and
32-point output can be used.
2. On FP1, the I/O link unit is controlled as the expansion I/O.However, the usable I/O is the special I/O
(fixed) for the I/O link.
<Special I/O for FP1 I/O link>
I/O type
X70 to X8F
Input relay
(32 points)
Y70 to Y8F
Output relay
(32 points)
Reference: For information on the I/O numbers, <Chapter 6 Remote I/O Map> <11.6 I/O
Allocation>
Note:
The I/O of FP1 is not controlled as slave station I/O by the CPU on the master station of
FP2/FP2SH/FP3/FP10SH.
11-4
I/O No.
When the corresponding output Y in the
FP2/FP2SH/FP3/FP10SH is turned ON, X70 to X8F will go ON.
When teh Y70 to Y8F is turned ON, the corresponding input X in
the FP2/FP2SH/FP3/FP10SH will go ON.
Description