Table of Contents
Advertisement
(5)RS485 interface
For connecting the communication cables.
(6)Fixing hooks
For installing the unit on the backplane for FP2.
(7)Mode selector switches (2)
Sets the operation mode (W/W2/F mode, baud rate).
The setting of the mode selector switches should be changed when the power supply is off.The setting
will be effective next time the power turns on.
(8)Connector for connecting to a backplane
Connects the unit to a slot on the backplane for FP2.
(9)Mounting screw
For attaching the unit to the backplane.
(10)Temporary joint hook
For attaching the unit to the backplane temporarily.
2-3
Advertisement
Table of Contents
Troubleshooting
