Run Mode - Graco PrecisionSwirl Instructions-Parts List Manual

Appendix A - Advanced Display Module (ADM)

Run Mode

Run mode screens are divided into six sections: home,
fluid plates, swirls, events, errors, and jobs. While in
Setup mode press
to navigate through the Run mode screens.
Fluid Plate Home Screen
NOTE: This screen only appears if more than one fluid
plate is installed.
The Fluid Plate Home screen shows an overview for
each of the individual fluid plates. The screen displays
the following items:
• Open dispense valves
• Active style number and name
• Flow rate
• Inlet and outlet pressures
• Progress bar indicating actual amount dispensed
(blue shaded portion), requested volume (upper and
lower arrows) and target volume (end of white bar).
116
to enter Run mode. Press
Swirl Home Screen
NOTE: This screen only appears if more than one Swirl
Dispenser is installed.
To access the Swirl Home screen, press the down arrow
key from the Fluid Plate Home screen. The Swirl Home
screen shows an overview for each of the individual
Swirl Dispensers. The screen displays the following
items:
• Requested motor speed
• Actual motor speed
• Progress bar indicating requested and actual motor
speed
3A2098S