Control Center Assembly Overview - Graco PrecisionSwirl Instructions-Parts List Manual

Control Center Assembly Overview

Front View
ADM
F . 7: Control Center Components
IG
The control center includes the following components:
• Advanced Display Module (ADM) with USB; see
page 20 for details.
• USB enables users to download job, event, and
data logs; save and restore system settings; and
customize the language. See USB Data on
page 63.
• 24 Vdc and 100-240 Vac customer-wired options
available.
Expansion Swirl Enclosure
If more than one swirl dispenser is installed, the system will have one Expansion Swirl Enclosure for each additional
swirl dispenser. The Expansion Swirl Enclosure is similar to the primary control center, but it does not include the
ADM or the Automation Gateway module.
3A2098S
Side View
CAN Splitter
- To Fluid Plate
- To ADM
• If system has a swirl dispenser: Swirl Control DGM
(the module on the left) and Swirl Board.
• Automation Gateway Module (the module on the
right), which can be one of the following five types:
• Discrete (supports up to 2 Fluid Plates)
• DeviceNet (supports up to 4 Fluid Plates)
• EtherNet/IP (supports up to 4 Fluid Plates)
• PROFIBUS (supports up to 4 Fluid Plates)
• PROFINET (supports up to 4 Fluid Plates)
Front View
100-240 Vac Assembly
Overview
Swirl Board
Gateway
Module
Swirl Control
DGM
19