Appendix B - Discrete Gateway Module (DGM) Connection Details
D-Sub Cable 123793
The D-sub cable 123793 is only compatible with single fluid plate systems. Systems with 2 fluid plates must use
cable 123792 and breakout board 123783.
The cable length of interface cable assembly 123793 is 50 ft (15.2 m). The following table identifies the cable
interface signals.
NOTE: See Appendix D - I/O Signal Descriptions, page 146, for I/O signal descriptions.
Wire Color
Green/Yellow
Gray
Blue/Green
Brown/Green
Blue/Orange
White
Blue
White/Yellow
Blue/Yellow
Brown/Yellow
Black/Red
White/Red
Blue/Red
Brown/Red
Black
Black/Gray
Brown/Orange
Brown
Black/Yellow
White/Gray
Blue/Gray
Brown/Gray
White/Orange
Black/Orange
Black/Green
White/Green
Orange
Swirl-related inputs apply only to systems with Swirl Dispensers.
* Dispense Error may be active high or low, depending on the setting on the Gateway setup screen. See Discrete
Gateway (Automation) Setup Screen, page 109.
3A2098S
Appendix B - Discrete Gateway Module (DGM) Connection Details
Description
Isolated Logic Power Supply
Isolated Logic GND
Dispense Ready
Dispense Error*
Dispense In Process
Dispense Purge
Dispense Remote Start
Style Bit 1
Style Bit 2
Style Bit 3
Style Bit 4
Style Strobe
Dispense Complete
Error Reset
Remote Start/Purge
Dispense Valve 1
Dispense Valve 2
Command Value
Analog GND
---
Swirl 1 Speed Command
Swirl 2 Speed Command
Dispense Valve 3/
Swirl 1 Enable
Dispense Valve 4/
Swirl 2 Enable
Digital CMD 1
Digital CMD 2
---
D-Sub
Pin Type
Pin No.
Supply
Supply
Digital Output
Digital Output
Digital Output
Digital Output
Digital Output
Digital Input
Digital Input
Digital Input
Digital Input
Digital Input
Digital Input
Digital Input
Digital Input
Digital Input
Digital Input
Analog Input
Analog Input
Analog Input
Analog Input
Digital Input
Digital Input
Digital Input
Digital Input
51 and 27
70
9
11
12
15
16
52
53
54
55
56
57
58
59
73
74
1
2
3
21
23
75
76
77
78
N/C
121