Removing Punch Waste; Finisher Sr4020 - Ricoh Pro C550EX Operating Instructions And Troubleshooting

Removing Punch Waste

This section describes how to remove punch waste.
• Remove the punch waste according to the finisher type. Check the type if you are unsure. For details
about type of finisher, see "Appendix", About This Machine.
• While "Hole Punch Receptacle is full." is displayed, you cannot use the Punch function.
• "Hole Punch Receptacle is full." is displayed until the punch waste box is reinstalled.
• If the message is still displayed, reinstall the punch waste box.

Finisher SR4020

This section describes how to remove punch wastes from the Finisher SR4020.
1. Open the finisher front cover.
2. Pull out the punch waste box carefully, and then remove punch waste.
BTD402S
BAY035S
Removing Punch Waste
4
97