Removing Staple Waste - Ricoh PRO C751 Troubleshooting Manual

Removing Staple Waste

This section describes how to remove staple waste when using the Finisher SR5030 or Booklet Finisher
SR5040.
If staple waste box is full, a message appears on the display panel. When the message appears,
remove staple waste.
• While the message is displayed, you cannot use the staple function.
• The message is displayed until the staple waste box is reinstalled.
• If the message is still displayed, reinstall the staple waste box.
Open the finisher front
cover.
Pull out the staple
waste box.
Remove staple waste.
Reinstall the staple
waste box.
Close the finisher front
cover.
Removing Staple Waste
CAL135
65
2