LG PRCKD42E Owner's Manual page 38

FAN DRIVER MODULE CONNECTION
38
Fan Driver Module Address Settings
- The address of each module must be set correctly in order for the motor to function properly.
- Each fan driver module has two driver PCBs, and each of the PCBs must be given a separate ad-
dress.
- The PCB address can be set by using the 'SW_DIP' of the driver PCB.
Set the addresses by referring to the following.
- Fan Driver PCB Address Settings
Ventilation Fan_Motor
Classification
Modul #1 No.1 PCB
Modul #1 No.2 PCB
Modul #2 No.1 PCB
Modul #2 No.2 PCB
Modul #3 No.1 PCB
Modul #3 No.2 PCB
Dip Switch Settings
[SW_DIP]
Dip Switch Settings
Switch ON Switch OFF
OFF
Classification
Modul #1 No.1 PCB
Modul #1 No.2 PCB
Modul #2 No.1 PCB
Modul #2 No.2 PCB
Modul #3 No.1 PCB
Modul #3 No.2 PCB
Dip Switch Settings