System Settings - LG PRCKD42E Owner's Manual

SYSTEM SETTINGS

56
SYSTEM SETTINGS
Log into System Settings
- System Settings
- After installing the AHU, you need to set the values necessary for general system operation.
This can be done in 'HMI System Settings'.
To enter System Settings, you need to first enter HMI Service Settings mode.
Follow the steps below to enter the HMI Service mode.
1) Connect power to the Control Kit to be automatically taken to the login page as shown below.
2) You need to enter Service mode in order to log into the System Settings screen. Hold down
the box in the upper left corner for more than 3 seconds to open the password box.
Enter the password 'digital21' and then click the 'OK' button to log into Service mode.
3) Click the 'Settings' button in the menu below to move to the Settings Screen.
Select 'System Settings' in right menu to enter the System Settings screen.
Refer to HMI Settings for more details on settings.
➧
➧
➧