CONTROL KIT INSTALLATION
18
CONTROL KIT INSTALLATION
Determine the Production Installation Location
- Check the Control Kit installation location in accordance with the site conditions and then check
in the AHU product.
<AHU>
!
CAUTION
• Consider the minimum space for opening and closing the Control Kit door in order to se-
cure the space for maintenance service and installation when determining the Control Kit
installation location. If the Control Kit is installed facing the wall, make sure there is at least
900mm distance between the wall and the product case.
• Having not enough space can cause problems in installing the product or providing mainte-
nance service. Make sure there is enough space when installing the Control Kit.
- Please check the location of the holes behind the Control Kit and installation materials.
4 holes
<Control Kit Back Side>
Detail
Installation Location
(When installing on the side of the product)
Installation Materials
Installation bolts (4EA)
Installation nuts (4EA)
4-Ø12 hole