LG PRCKD42E Owner's Manual page 62

SYSTEM SETTINGS
62
2) Damper Settings
- Damper settings in the Smoke Control mode determine the damper angle that activates
when a smoke detection signal is received.
- In order to set the warm-up coil type, press the "
that can be selected.
- The default value of the damper in the Smoke Detection mode is set to 'Full-Close', but you
can choose between 'Full-Open' and 'Full-Open'.
3) Fan Operation Settings
- Fan settings in the Smoke Control mode determine the fan speed that increases when a
smoke detection signal is received.
- The default frequency is 0 Hz, but it can be adjusted at an increment/decrement of 1 Hz be-
tween 0~60 Hz. A warning message will appear if a value outside the range of fan settings
is entered, in which case you can re-enter the value within the range.
- The operation of in the frequency according to the type of the fan installed is as follows.
Inverter Fan: Starts at 0~60 Hz
Rated Fan: Stops at 0 Hz and starts at 1~60 Hz.
" button to see the list of damper angles
Select each of the damper distribu-
tions and the unit will run in the
damper angle selected when en-
tering the Smoke Control mode.
② Enter the desired input value by using the key
button.
③ Enter the time and then click the 'OK' button to
enter the input value.
① Press the frequency indi-
cator. Then a screen will
appear where you can
input a frequency value.