Product Composition - LG PRCKD42E Owner's Manual

PRODUCT COMPOSITION

8
PRODUCT COMPOSITION
Package Components
The Control Kit is composed of the following. Please open the box and check the contents.
<Control Kit>
Sensor (sold separately)
- You must purchase/install the following temperature or temperature/humidity sensor before
starting the product.
- Please refer to the Sensor Installation section for specifications and installation location.
Item
Temperature sensor
Temperature and humidity
sensor
! CAUTION
• Our AHU doesn't support resistance-type sensors. Using an resistance-type sensor can
cause a discrepancy between the actual temperature and measured temperature, which
can cause the product to malfunction.
• Please install a voltage-type sensor as shown above.
- Number of Bolts: 4 EA
Spec: M10/70 mm
- Number of Nuts: 4 EA
Spec: M10
<Nuts/bolts for installation>
- Power: AC 24 V
- Output signal: DC 0~10 V
- Temperature boundary: -50~50 °C
- Power: AC 24 V
- Output signal: DC 0~10 V
- Temperature boundary: -40~70 °C
- Humidity boundary: 0~95 % RH
INSTALLATION MANUAL
AHU CONTROL KIT
• Please read this installation manual completely before installing the product.
• Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
• Please retain this installation manual for future reference after reading it
thoroughly.
MODELS : PRCKD42
www.lg.com
P/NO : MFL62171708
<Installation/User Manual>
Spec