LG PRCKD42E Owner's Manual page 63

System Settings 2
- System Settings 2 determines the temperature, pressure and speed of each sensor installed.
- The temperature range must be set because although by default, each of the AHU sensors
send and receive signals at DC 0~10V and the voltage range is the same with all the manufac-
turers, the actual temperature is different from one another. (Refer to the manual that came
with each sensor for more details on temperature range.)
Sensor Range
Enter the temperature range for each sensor in below order.
SYSTEM SETTINGS
① Click the Max/Min Display on the sen-
sor you wish to set to open a screen
where the desired value can be en-
tered.
② Enter the desired input value by using
the key button.
③ Enter the value and then click the
'OK' button to enter the input value.
63