LG PRCKD42E Owner's Manual page 105

Administrator Settings 4
- For Administrator Settings 2, refer to page 47 of the Manual.
- Administrator Settings 4 is for product operation mode and HMI environment settings.
1. Set the Control Mode
The Control Mode is used to set the main body of product operation.
Click the Select button as shown below to see the Control Mode for product operation.
- When the Local Mode is selected: The data can be monitored from a remote distance, but
- When the Remote Mode is selected: This mode enables you to use Control Commands and
- When the Schedule Mode is selected: The product operates according to the pattern applied
Click the button in the box to see a
list of modes that can be selected.
Select and apply the mode you
wish to use to.
the product may not run according to your command ac-
cording to the type of command for production operation.
monitor the system from a remote distance.
However, in the Remote Mode, control commands can-
not be used in the HMI. Select the Local Control Mode
to use the commands in the HMI.
in the Schedule Main Screen.
HMI SETTING
105