Replacing The System Board; Removing The System Board; Mini Tower System Board Screws - Dell OptiPlex 210L User Manual

Back to Contents Page
Replacing the System Board
Dell™ OptiPlex™ 210L User's Guide

Removing the System Board

1. Shut down the computer through the Start menu.
2. Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut
down your computer, turn them off now.
NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
3. Disconnect any telephone or telecommunication lines from the computer.
4. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
CAUTION: To guard against the electrical shock, always unplug your computer from the electrical outlet before removing the cover.
5. Remove the computer cover:
Remove the mini tower computer
l
Remove the small desktop computer
l
NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.
6. Remove any components that restrict access to the system board (CD/DVD drive(s), floppy drive, hard drive, and I/O panel).
7. Remove the processor and heat sink assembly:
Remove the mini tower processor and heat sink
l
Remove the small desktop processor and heat sink
l
8. Disconnect all cables from the system board.
9. Remove the screws from the system board. See the illustrations below for screw locations:
See "Mini Tower System Board
l
See "Small Desktop System Board
l
10. Slide the system board assembly toward the front of the computer, and then lift the board up and away.

Mini Tower System Board Screws

cover.
cover.
assembly.
assembly.
Screws" for an illustration of the screw locations.
Screws" for an illustration of the screw locations.