Replacing the logo board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the logo board with the slot on the chassis and replace the two screws
(M3x5) that secures the logo board to the chassis.
2
Connect the logo-board cable to the logo board.
Post-requisites
1
Replace the
front
2
Replace the
right-side
computer. After working inside your computer, follow
After working inside your
cover.
cover.
computer. For more safety best
www.dell.com/
Before
43