Removing the logo board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
right-side
2
Remove the
front
Procedure
1
Disconnect the logo-board cable from the logo board.
2
Disconnect the two screws (M3x5) that secures the logo board to the chassis.
computer. After working inside your computer, follow
After working inside your
cover.
cover.
computer. For more safety best
www.dell.com/
Before
41