Warning Output Enable/Disable Setting (Un\G46) - Mitsubishi Melsec-Q Series User Manual

3
SPECIFICATIONS
3.4.13

Warning output enable/disable setting (Un\G46)

Enable/disable state of warning output for process alarm or rate alarm is set for each
channel.
(1) Setting methods
(a) Warning output enable/disable setting is set for the corresponding channels in the
Figure 3.30 Setting of Warning output enable/disable setting (Un\G46)
(b) Turn on Operating condition setting request (Y9) to activate the setting.
(2) Default value
Both process alarm and rate alarm are set to "Disable" for all channels (FFFF
following figure.
b15 b14 b13 b12 b11 b10
CH8 CH7 CH6 CH5 CH4 CH3 CH2 CH1
Rate alaram setting
3.4.13 Warning output enable/disable setting (Un\G46)
b9 b8 b7 b6 b5 b4
CH8 CH7 CH6 CH5
Process alarm setting
0: Enable, 1: Disable
3.4 Buffer Memory
b3 b2 b1 b0
CH4 CH3 CH2 CH1
).
H
3
- 43
1
2
3
4
5
6
7
8