Toro Outcross 9060 Service Manual page 306

Installing the Rear Axle (continued)
Traction and PTO Drive: Service and Repairs
12. Grease the rear axle with Mobil high-temp XHP-222 grease or equivalent ;
refer to the traction unit Operator's Manual.
13. Apply anti-seize lubricant to the inner edge of the wheel and install the wheel.
Tighten the lug nuts in a crossing pattern from 380 to 434 N∙m (280 to 320
ft-lb).
14. Check and adjust front tire air pressure as necessary.
Page 7–12 Outcross 9060
18234SL Rev B