Toro Outcross 9060 Service Manual page 244

Testing the Paddle and Transmission Lever Switches (continued)
Electrical System: Electrical Component Testing
4. Replace the switch if testing determines that it is faulty.
5. If the switch tests correctly and a circuit problem still exists, check the wire
harnesses; refer to
6. After testing is complete, connect machine wire harness connector to the
switch.
7. Install the dash cover; refer to
Panels and Dash Cover (page
Appendix A (page A–1).
Installing the Steering Wheel, Instrument
8–16).
Page 6–36 Outcross 9060
18234SL Rev B