Toro Outcross 9060 Service Manual page 200

Installing the Auxiliary Load Valve (continued)
Hydraulic System: Service and Repairs
5. Operate the auxiliary load valve. Check for hydraulic leaks and correct
if necessary.
6. Install the operator's console; refer to
Console (page 8–17).
7. Test the attachment/loader circuit relief valve pressure before returning the
machine to service; refer to
Pressure Test (page
8. Check the hydraulic fluid level and adjust if necessary before returning the
machine to service.
Removing and Installing the Operator's
Attachment/Loader Circuit Testing – Relief Valve
5–43).
Page 5–104 Outcross 9060
18234SL Rev B