Toro Outcross 9060 Service Manual page 274

Electrical System: Electrical Component Testing
g257157
1. Rear SCV hydraulic manifolds
The optional rear Selector Control Valve (SCV) relay is located below the rear
SCV hydraulic manifolds. The rear SCV relay is used to provide current to the
4 rear SCV hydraulic solenoid valves. The rear SCV relay is energized by the
T1: TEC.
g267770
1. Refrigerant receiver drier
2. AC condenser fans relay
Figure 106
(shown with bed removed)
2. Rear SCV relay
Figure 107
3. AC switch signal relay
4. AC clutch relay
Page 6–66 Outcross 9060
18234SL Rev B