Assembling the Steering Cylinder (continued)
Outcross 9060
18234SL Rev B
4. Mount the steering cylinder barrel in a vise by clamping on the cylinder
mounting brackets.
5. Coat the inner bore of the cylinder with clean hydraulic fluid and fit the piston
and rod assembly into the cylinder barrel.
6. Install the 2 spacers and the 2 head assemblies.
7. Secure the heads in the barrel with the external collars. Tighten the external
collars with a strap, chain, or spanner wrench.
8. Install and tighten the set screws in the external collars.
Page 5–97
Hydraulic System: Service and Repairs