Setting Of Functions - JUKI DDL-900B Instruction Manual

6. Setting of functions

Set value for the function setting can be changed.
❾ '

 ❾
 ❾
⇩
1) Turn the power ON while keeping
 held pressed.
The indication on the display section is changed
to "n. ".
The numeric character displayed on the right side
of "n." represents the function setting number.
(The figure shows the case of "No. 96 Maximum
sewing speed".)
2) Press and
number of function setting.
and
the left) are used for changing the number
in the "fast-feed" mode.
switch  to change the setting.
3) Press
The indication is changed to the set value.
(The figure shows the case where the set value is
changed from the indication "n.96" to "4000" (set
value) by pressing
4) Press and
value.
switch  to confirm the set value.
5) Press
6) The display returns to the state described in 1).
To additionally change the set value for other
function setting numbers, repeat the steps of
procedure from 2).
When you have completed the set value
changing, press
machine is restored to its normal sewing state.
– 26 –
switch
switches ❾ to change the
switches ❾
(two switches on
'
switch .)
switches ❾ to change the set
switch . The sewing