Changing The Resolution - Siemens SITRANS F Operating Instructions Manual

7.3.7.1

Changing the resolution

In order to change the resolution of the process value shown in the operation view (for example
mass flow), set the decimal places parameter for the selected process value. For example,
the decimal places for process value Mass flow is defined in Decimal places.
The resolution can also be changed by changing the resolution of one configuration parameter
for this process value. For example Low flow cut-off. Any changes in resolution will change
the resolution of all configuration parameters for this process value as well.
Parameter list - read only
Table 7-7
Key
Parameter list - editable
The help texts describe the possible adjustments of the respective parameters.
Table 7-8
Key
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB
Key functions - read only
Function
Exit parameter list
No functionality
No functionality
No functionality
Key functions - edit
Function
Escape the view without changing the value.
Select the option above.
Operating
7.3 Operating the FST020
55