6.4.8
Changing parameter settings using SIMATIC PDM
Note
For a complete list of parameters, see the "LUI menu structure" (Page 189).
Clicking on "Cancel" during an upload from device to SIMATIC PDM will result in some
parameters NOT being updated.
Many parameters are accessed via the online menus in PDM, see "Parameters accessed via
drop-down menus" for the others.
1. Launch SIMATIC PDM, connect to SITRANS FC430, and upload data from the device.
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01
Commissioning
6.4 Commissioning with PDM
85