Commissioning; Basic Safety Notes; Hazardous Contact Voltage - Siemens SITRANS F Operating Instructions Manual

Commissioning

This chapter gives instructions to commissioning your device, see Commissioning via local
display (Page 37).
Furthermore, the device can be commissioned using SIMATIC PDM, see Commissioning with
PDM (Page 175).
6.1

Basic Safety notes

Loss of type of protection
Damage to device if the enclosure is open or not properly closed. The type of protection
specified on the nameplate or in Technical data (Page 65) is no longer guaranteed.
● Make sure that the device is securely closed.
Hot surfaces
Risk of burns resulting from hot surfaces.
● Take corresponding protective measures, for example by wearing protective gloves.
6.1.1

Hazardous contact voltage

Hazardous contact voltage
May cause death or serious injury.
Risk of injury through hazardous contact voltage when the device is open or not completely
closed.
The degree of protection specified on the nameplate or in Technical data (Page 65)is no
longer guaranteed if the device is open or not properly closed.
● Make sure that the device is securely closed.
FST020 IP65 NEMA 4X
Operating Instructions, 09/2017, A5E41425845-AB
CAUTION
WARNING
WARNING
6
35